Private Lobbies

This feature is only accessible to players with the MCC+ subscription. You can buy one by visiting the webstore.

Private Lobbies (more colloquially known as Plobbies) are lobbies hosted by players to play private games with custom settings, similar to the Party system. Plobbies require at least 4 players, and can have up to 40 players in them.

The following is a list of all the custom settings for plobbies.

General Settings

These settings apply for the entire plobby as a whole and include privacy and team settings.

Lobby Name The name shown for this Private Lobby on the Plobby Browser. Lobby Description The description shown for this Private Lobby on the Plobby Browser. Player Limit Changes the maximum players that can play in your Private Lobby. All remaining slots can be taken up by spectators. Must be between 4 and 40. Lobby Type Change how players can join your Private Lobby. Your join code will be displayed on the info icon in the Private Lobby Main Menu. Players can use /plobby join CODE Default Join Pool Set which pool new players are added to by default. Automatic will add to players until the player limit has been reached, at which point it adds to spectators. Party Invite Permissions Allow Parties to invite players to your Private Lobby. Party Grouping Changes how parties are used to form teams. By default, players that share a party are placed on the same team. Auto Shuffle Automatically shuffles all players not in the leader's party between the players and spectator groups after each game. Auto Kick Automatically kicks all offline players from the Private Lobby when trying to start. Show Invite Code On-Screen Show the Private Lobby's Invite Code on-screen in the scoreboard. Only applies when using the Join by Code Lobby Type. Let Kicked Re-join Configures whether players that have been kicked from the Private Lobby are allowed to join again. If disabled, a kicked player cannot rejoin this Private Lobby until it is re-created. Players that are in the Ignore List of the leader can never join a Private Lobby.

Hole in the Wall Settings

The following settings can be specifically applied to Hole in the Wall:

Enabled Traps [28/38 Enabled] Configures which traps appear. Certain traps may already be disabled based on the selected map. Game Speed [100%] Multiplies the speed by which the game increases in difficulty, increases wall speed, and shrinks the platform. Must be between 50% and 500%. Map Pool [All Enabled] Configures which maps will be used for this game. Remove Trap Limits [Off] Removes limitations placed on traps, such as limits on the amount of different traps that may appear in one game or map specific restrictions. Round Duration [210s] Configures the duration of each round in seconds. Must be between 30s and 1200s.

Enabled Traps [28/38 Enabled] Configures which traps appear. Certain traps may already be disabled based on the selected map. Game Speed [100%] Multiplies the speed by which the game increases in difficulty, increases wall speed, and shrinks the platform. Must be between 50% and 500%. Map Pool [All Enabled] Configures which maps will be used for this game. Remove Trap Limits [Off] Removes limitations placed on traps, such as limits on the amount of different traps that may appear in one game or map specific restrictions. Round Duration [210s] Configures the duration of each round in seconds. Must be between 30s and 1200s.

All traps are enabled by default for the "Enabled Traps" option, with exception of those disabled in matchmade games:

• Aw Man!
• Bomb Squad
• Getting Dizzy
• High Gravity Dart
• Hot Revenge!
• Molasses!
• My Eyes
• Ravager
• Silverfish
• Spooky Ghosts

Each enabled trap has a weight of 1 when Advanced Selection is enabled.

TGTTOS Settings

The following settings can be specifically applied to TGTTOS:

Enabled Modifiers [All Enabled] Configures which modifiers appear. Certain modifiers may already be disabled based on the selected map. Map Pool [All Enabled] Configures which maps will be used for this game. Modifier Amount [Default] Configures the amount of rounds that will have a modifier. When set to default, there will be a 40% chance for each round to have a modifier, with at least 1 round always having one. Can be set to 0 / 1 / 2 / 3, in addition to Default. Player Punching [On] Configures whether players can punch one another. Remove Modifier Limits [Off] Removes limitations placed on modifiers, allowing modifiers to be played multiple times or on maps they are normally disabled on. Round Duration [90s] Configures the duration of each round in seconds. Must be between 30s and 1200s.

Enabled Modifiers [All Enabled] Configures which modifiers appear. Certain modifiers may already be disabled based on the selected map. Map Pool [All Enabled] Configures which maps will be used for this game. Modifier Amount [Default] Configures the amount of rounds that will have a modifier. When set to default, there will be a 40% chance for each round to have a modifier, with at least 1 round always having one. Can be set to 0 / 1 / 2 / 3, in addition to Default. Player Punching [On] Configures whether players can punch one another. Remove Modifier Limits [Off] Removes limitations placed on modifiers, allowing modifiers to be played multiple times or on maps they are normally disabled on. Round Duration [90s] Configures the duration of each round in seconds. Must be between 30s and 1200s.

Every enabled modifier and map in the respective pools have a weight of 1 when Advanced Selection is enabled.

Battle Box Settings

The following settings can be specifically applied to Battle Box:

Item Tiers [0] Modifies the item tier of all equipment and chest loot. Negative values lower item tier (diamond -> iron) while positive values increase item tiers (diamond -> netherite) and increase item stack sizes. Can be set to -2 / -1 / 0 / 1 / 2 / 3. Map Pool [All Enabled] Configures which maps will be used for this game. Maximum Kit Selections [2] Configures the amount of players that can claim the same kit. If there are more players than claimable kits some players will not receive any kit. Must be between 0 and 4. Player Health [100%] Multiplies the maximum health of each player by the set percentage. Must be between 5% and 200%. Round Amount [Auto] Configures the amount of rounds that will be played. If set to 'auto' the amount of rounds will be automatically determined based on the team amount. Must be between 1 and 25. Round Duration [60s] Configures the duration of each round in seconds. Must be between 30s and 1200s. Team Limit [10] Changes the maximum amount of teams the game will have. If fewer teams are available more players will be assigned to each team. Teams will have 4 members by default. Must be between 2 and 10.

Item Tiers [0] Modifies the item tier of all equipment and chest loot. Negative values lower item tier (diamond -> iron) while positive values increase item tiers (diamond -> netherite) and increase item stack sizes. Can be set to -2 / -1 / 0 / 1 / 2 / 3. Map Pool [All Enabled] Configures which maps will be used for this game. Maximum Kit Selections [2] Configures the amount of players that can claim the same kit. If there are more players than claimable kits some players will not receive any kit. Must be between 0 and 4. Player Health [100%] Multiplies the maximum health of each player by the set percentage. Must be between 5% and 200%. Round Amount [Auto] Configures the amount of rounds that will be played. If set to 'auto' the amount of rounds will be automatically determined based on the team amount. Must be between 1 and 25. Round Duration [60s] Configures the duration of each round in seconds. Must be between 30s and 1200s. Team Limit [10] Changes the maximum amount of teams the game will have. If fewer teams are available more players will be assigned to each team. Teams will have 4 members by default. Must be between 2 and 10.

Every enabled map in the Map Pool has a weight of 1 when Advanced Selection is enabled.

Sky Battle Settings

The following settings can be specifically applied to Sky Battle:

Border Speed [100%] Multiplies the speed by which the border moves. Must be between 1% and 500%. Enable Roof and/or Floor Borders [On] Controls whether the roof and/or floor border is enabled. Fall Damage [On] Configures whether players take fall damage. Item Tiers [0] Modifies the item tier of all equipment and chest loot. Negative values lower item tier (diamond -> iron) while positive values increase item tiers (diamond -> netherite) and increase item stack sizes. Can be set to -2 / -1 / 0 / 1 / 2 / 3. Map Pool [All Enabled] Configures which maps will be used for this game. Player Health [100%] Multiplies the maximum health of each player by the set percentage. Must be between 5% and 200%. Team Limit [8] Changes the maximum amount of teams the game will have. If fewer teams are available more players will be assigned to each team. Teams will have 4 members by default. Must be between 2 and 8.

Border Speed [100%] Multiplies the speed by which the border moves. Must be between 1% and 500%. Enable Roof and/or Floor Borders [On] Controls whether the roof and/or floor border is enabled. Fall Damage [On] Configures whether players take fall damage. Item Tiers [0] Modifies the item tier of all equipment and chest loot. Negative values lower item tier (diamond -> iron) while positive values increase item tiers (diamond -> netherite) and increase item stack sizes. Can be set to -2 / -1 / 0 / 1 / 2 / 3. Map Pool [All Enabled] Configures which maps will be used for this game. Player Health [100%] Multiplies the maximum health of each player by the set percentage. Must be between 5% and 200%. Team Limit [8] Changes the maximum amount of teams the game will have. If fewer teams are available more players will be assigned to each team. Teams will have 4 members by default. Must be between 2 and 8.

Every enabled map in the Map Pool has a weight of 1 when Advanced Selection is enabled.

Parkour Warrior Survivor Settings

The following settings can be specifically applied to Parkour Warrior Survivor:

Difficulty Multiplier [100%] Multiplies the difficulty of the obstacles that will appear in the map. Must be between 20% and 300%. Elimination Threshold Scaling [On] If enabled, the player amounts which are allowed to complete each leap are automatically scaled based on the amount of players in the lobby. Leap Duration [50s] Configures the duration of each leap in seconds. The final leap will be 100 seconds longer. Must be between 30s and 1200s. Map Seed Configures the seed to use when generating the map. Will be random if left blank. Seeds only stay the same while the same monthly Parkour Warrior Dojo courses are present as the obstacle pool is based on the current courses. Daily course obstacles are only included if no seed is set.

Difficulty Multiplier [100%] Multiplies the difficulty of the obstacles that will appear in the map. Must be between 20% and 300%. Elimination Threshold Scaling [On] If enabled, the player amounts which are allowed to complete each leap are automatically scaled based on the amount of players in the lobby. Leap Duration [50s] Configures the duration of each leap in seconds. The final leap will be 100 seconds longer. Must be between 30s and 1200s. Map Seed Configures the seed to use when generating the map. Will be random if left blank. Seeds only stay the same while the same monthly Parkour Warrior Dojo courses are present as the obstacle pool is based on the current courses. Daily course obstacles are only included if no seed is set.

Dynaball Settings

The following settings can be specifically applied to Dynaball:

Allow Building [On] Configures whether players are allowed to build. If disabled there is no peace phase or block drops. Enabled Crate Items [All Enabled] Configures which items can drop from crates. Map Pool [All Enabled] Configures which maps will be used for this game. Spawn TNT Crates [On] Configures whether TNT crates will spawn. TNT Strength [25%] Multiplies the strength of TNT explosion knockback. Must be between 1% and 300%.

Allow Building [On] Configures whether players are allowed to build. If disabled there is no peace phase or block drops. Enabled Crate Items [All Enabled] Configures which items can drop from crates. Map Pool [All Enabled] Configures which maps will be used for this game. Spawn TNT Crates [On] Configures whether TNT crates will spawn. TNT Strength [25%] Multiplies the strength of TNT explosion knockback. Must be between 1% and 300%.

Enabled crate items have the following weights by default when Advanced Selection is enabled:

• Chicken Air Strike - 1
• Jump Potion - 1
• Line Charge - 2
• Powder Bomb - 2
• Rocket Cannon - 1
• Spark of Levitation III - 2
• Spawner o' Creepies - 2
• Spawner o' Skellys - 2
• Spawner o' Zombos - 2
• Speed Potion - 1
• TNT Drop - 3

Rocket Spleef Rush Settings

The following settings can be specifically applied to Rocket Spleef Rush:

Enable Elytra Durability [On] Configures whether elytras have durability. Map Movement Speed [100%] Multiplies the speed by which islands decay and new islands are spawned. Must be between 20% and 200%. Map Pool [All Enabled] Configures which maps will be used for this game. Maximum Ammo Capacity [3] The maximum amount of rockets that can be held in the Rocket Cannon. Can be set to 0 / 1 / 2 / 3. Player Punching [On] Configures whether players can punch one another. Round Duration [300s] Configures the duration of each round in seconds. Must be between 30s and 600s. Updraft Amount [2] Controls the amount of Updraft items each player will initially receive. Can be set to 0 / 1 / 2 / 3.

Enable Elytra Durability [On] Configures whether elytras have durability. Map Movement Speed [100%] Multiplies the speed by which islands decay and new islands are spawned. Must be between 20% and 200%. Map Pool [All Enabled] Configures which maps will be used for this game. Maximum Ammo Capacity [3] The maximum amount of rockets that can be held in the Rocket Cannon. Can be set to 0 / 1 / 2 / 3. Player Punching [On] Configures whether players can punch one another. Round Duration [300s] Configures the duration of each round in seconds. Must be between 30s and 600s. Updraft Amount [2] Controls the amount of Updraft items each player will initially receive. Can be set to 0 / 1 / 2 / 3.

Every enabled map in the Map Pool has a weight of 1 when Advanced Selection is enabled.